EU policy for sustainable construction
Contents |
[edit] Introduction
The construction sector represents 40% of the European Union's (EU) total energy consumption, 35% of its greenhouse gas emissions, a third of its water consumption, and a third of the waste generated. Taking action to reduce those numbers is absolutely necessary.
Reducing energy consumption and using renewable energies in the construction sector can help the EU to abide by the Kyoto Protocol. In the same way, it would help the EU achieve its long-term commitments to hold the increase in the global average temperature below 2°C, and to reduce greenhouse gas emissions by at least 20% by 2020, compared with 1990 levels.
Achieving those targets before the deadline seems like an arduous task in Spain due to the crisis in the sector the country has experienced lately. The current situation has not helped in achieving any improvement to reach the above mentioned challenges.
[edit] At what stage is the EU policy?
Before the end of 2018, the European Parliament, the European Commission and the European Council should establish the guidelines regarding energy, in order to launch a new directive which will likely become effective in 2020.
This way, European citizens will have a guide to set the course towards their common commitment of 2015 – to abide by the Paris Agreement and its applicability after 2020, once the validity of the Kyoto Protocol expires – regarding total decarbonization in 2050 to reverse climate change.
The European Parliament is pushing the use of renewable energies with the draft of the new directive, which increases the percentage of such energies from 27 to 35% by 2030. In addition, it protects self-supply energies and it ends the 'sun tax' approved, by the Spanish government, despite widespread criticism.
Spain is the EU country with the highest number of environmental infringements. In 2017, the nation accumulated 30 open cases, four more than the year before, representing almost 10 % of all the EU cases. Spain ranks first in the list of most fined countries for breaking the EU policy, and this fact should lead to further thoughts. Cases include all areas, from poor water management to omission of assessments in urban projects, habitats protection or air pollution, among others.
[edit] What about Spain?
In Spain, the great challenges of the construction sector in the near future are the Europe 2020 strategy and to keep to the Directive 2010/31/EU on the Energy Performance of Buildings. As of 31 December 2020, new buildings in the EU will have to consume ‘nearly zero-energy’, although new buildings owned and occupied by public authorities will already apply this directive after 31 December 2018.
Article 4 of the Directive reads, 'minimum energy performance requirements shall be reviewed at regular intervals which shall not be longer than five years'. For this reason, a new update of the Basic Document of Energy Saving in Buildings DB-HE of the Spanish Technical Building Code (CTE), is expected to be approved in 2018.
Spain’s new document will review the obligatory regulations, so new buildings built after the effective date are able to reduce its energy consumption (below 50% of the current demands), as well as to increase the qualities of the building, its facilities, and to incorporate renewable energies, meaning attention is paid to its demands, and consequently, CO2 emissions could reach values near zero.
[edit] What will happen after 2020?
At a European level, there is the 'Level(s) – A common EU framework of core sustainability indicators for office and residential buildings' initiative, which is in its initial steps.
The fundamental idea of this initiative is to harmonise voluntary sustainability certificates in order to legislate on a range of sustainability parameters, besides energy. Level(s) provides a set of indicators and common metrics for measuring the performance of buildings along their life cycle. It also enables other important related performance aspects to be assessed using indicators and tools for health and comfort, life cycle cost and potential future risks to performance.
The intention is not to create a new standalone building certification scheme, or to establish performance benchmarks, but rather to provide a consistent and comparable voluntary reporting framework that works across national boundaries and has a broad potential for use by building sector professionals across the EU.
The EU values private certificates in sustainable construction as a basis to boost better practices and to be the engine of the market, considering that these methodologies always go beyond regulations and energy efficiency. Legislation on sustainability parameters is needed, although everything related to energy efficiency is already included in the current law, it still requires a basis for evaluating everything else: greenhouse gas emissions during building’s life cycle, efficient resources and materials with a circular life cycle, efficient use of water, or comfortable healthy places, among others.
[edit] How to anticipate this regulatory framework
Sustainable construction certificates are a key tool to anticipate future demands of the EU policy.
Certification brings economic benefits for those who promote, operate or maintain the building, benefits in terms of health and well-being for their occupants, as well as reducing building life-cycle environmental impacts. BREEAM evaluates ten categories, which go beyond energy efficiency, and analyses other issues like Water, Materials, Health and Wellbeing, Transport, Waste, Land Use and Ecology, Pollution, Management, and even Innovation.
BREEAM includes specific methodologies for communities’ design, new construction buildings and in use buildings, providing many opportunities to improve the existing buildings, reducing CO2 emissions and getting energy-efficient buildings.
This article was originally published here by BRE Buzz on 4 July 2018. It was written by Rosalía Fernández Pardo.
--BRE Buzz
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.